| Transmission Standards |
DVB, MPEG 2, OFDM |
| Front panel |
2 LEDs, Buttons: "standby", "up" and "down" |
| Conditional Access system |
One PCMCIA Interface for a Common Interface CA-module.
DVB standard.
|
| General data |
| The model code, variant, and serial number are located on
a label on the underside of the receiver.
|
| Supply voltage |
110-240V AC, 50-60Hz |
| Power consumption max |
50 W |
| Power consumption in
standby
|
3 W |
| Operating temperature |
+5° C to +45° C |
| Storage temperature |
- 40° C to +65° C |
| Humidity |
25 to 90% rel humidity |
| Operating distance for
remote control
|
max 10 meters |
| Dimensions (w x d x h) |
250 x 275 x 80 mm |
| RF input, modulator output |
| In/Output connectors |
IEC female/male |
| RF input frequency |
174-300; 474-862 MHz |
| RF input power level |
-78 to -30 dBm |
| RF impedance |
75 Ohm |
| Frequency range |
Loop through 47-862 MHz |
| Frequency range |
RF modulator 470-862 MHz |
| Output channel |
21 - 69 |
| Preset channel |
43 |
| Output signal |
PAL B/G, I and SECAM |
| TV SCART |
| Video output |
1 Vpp (1 dB)/75 Ohm |
| Audio output |
0.5 Vrms /RL >10 Ohm |
| RGB output |
Internal RGB |
| RGB bandwidth |
5.8 MHz ±3 dB |
| Fast blanking output |
Internal or from AUX SCART |
| Status output |
0/6/12 V/ RL 10 kOhm |
| AUX SCART |
| Video output |
1 Vpp (1 dB)/75 Ohm |
| Video input |
1 V pp /75 Ohm |
| Audio output |
0.5 Vrms /RL >10 kOhm |
| Audio input |
0.5 Vrms /RL >10 kOhm |
| Status input |
0/6/12 V/ RL >10 kOhm |
| DIGITAL AUDIO (S/PDIF) |
| Connector |
1 x RCA |
| AUDIO R L |
| Connector |
2 x RCA (R+L) |
| Output |
0.5 Vrms 0.5 dB/RL 10 kOhm |
| Restrictions |
Bluetooth products are not approved for use everywhere.
Please check with your local authorities.
The 260 T has a type label on the underside of the receiver
that has the symbol shown below to indicate
that it is equipped with the Bluetooth connectivity
function.
|
|
